Blum 79B9590-ONYX, 95

Description

New surface finish for better integration into darker cabinets
Corrosion protection comparable to standard nickel finish
High quality mounting plates with convenient cam height adjustment
BLUMOTION is integrated into the hinge cup
Deactivation switch for small/light doors
Geometry for door thicknesses up to 26mm (1″)
Boring distance range: 3mm to 7mm
45mm boring pattern
Dowel hinges must be inserted with knock-in tool or universal insertion ram

How to Choose A Blum Hinge Mounting Plate

Choosing a mounting plate can be challenging even for an experienced cabinet maker! To make the right choice, you need to complete a few steps:

1. Make sure you note the manufacturer for your hinge and search for a plate from the same manufacturer.
2. Measure your cabinet overlay in millimeters. For assistance, please read our handy article,How to Measure Cabinet Door Overlay.
3. Once you determine your overlay, using the metric measurement, check the table below to find the plate height. The H – column is the Plate height to use for your application. The B (blue row below the table) section gives you the Boring Distance (drilling distance from the edge of the door).

   Example: If your overlay is 16 mm, you need a 0mm Plate Height and a Boring Distance of 5mm.

   

4. Go to theCabinet Hinges/Hinge Mounting Platescategory.
5. Using the filter on the left side of the page, make the following choices and then clickShow:
   1. Select the hinge manufacturer
   2. Select the type of Cabinet: Frameless (sometimes called panel) or Face Frame
   3. Select the Plate Height from the Overlay table attached in the additional images.
      • Note: there can be multiple solutions for the mounting plate height and boring distance combinations. Your choice may be influenced by the reveal between doors on your application. See the corresponding minimum reveal table for the hinge model. The minimum reveal table is also shown in the additional images section above.
   4. Select the Plate Type: Wing 1-piece, Wing 2-piece or In-line (Straight)
   5. Choose the correct Fixing Type for your needs: Screw-on or Wood screws, System (Euro) screws, Press-in Dowels, Expanding Dowels or Tool-Free.
      
      Click here for more information about Hinge Fixing Types (opens in a new tab).

1. Manufacturer

   BLUM INC

2. SKU

   11410451

3. Manufacturer’s Part

   79B9590-ONYX

4. Weight

   1.090 lbs

5. Sold in Multiples of

   1

6. Priced By

   Each

7. UPC/EAN Code

   9009494216929

8. Degree of Opening

   95

9. Cabinet Type

   Face Frame Frameless

10. Specialty Application

    Blind Corner

11. Overlay Overlay is the distance that your cabinet door extends past the actual cabinet opening on the hinge side.

    Inset

12. Closing Type

    Soft-Closing

13. Hinge Cup Mounting How the cup is attached to the cabinet

    Tool-Free

14. Boring Pattern How far apart the mounting holes in the cup are placed

    45mm

15. Application

    Blind Corner

16. Configuration

    Hinge and Plate Sold Separately

17. Cup Diameter

    35mm

18. Cup Depth

    13mm